RCS 8AH485D RS485 8 Channel Hub

- CommStar Network Device

- True STAR Wiring Hub

- 8 Channel RS485 Output

- RS485 or RS232 Master Input

- Network Termination Issues Resolved

- 4000 Ft Line Length On Each Channel

- 12VDC Network Power Distribution

- 4 Wire Terminal Strip: 2 Power, 2 Data

- Hubs can be daisy chained for 64 channels

CommStar Network Star Wiring Hub

RCS CommStar Control Units can connect to this external 8 channel active hub to provide a STAR wiring connection to the CommStar. Also can be used with the CS308’s internal 8 channel hubs for further expansion.

RS485 Active Hub
The unit has 8 independent RS485 output channels each with their own driver. All outputs see input data simultaneously. Each input channel is equipped with automatic send data control to allow for ½ duplex transmissions

Expansion: Up to 64 channels.

RS232 Active Hub
Model 8AH485D has an RS232 master input, which is converted to RS485 and distributed out the 8 channels.

STAR Wiring
Each channel is independent and allows for home run, or star wiring, to each channel without using the typical RS485 daisy chain wiring.
This eliminates concerns about terminations. Since each line has its own driver, each line can be up to 4000 ft.

NOTE: You can use daisy chain wiring within EACH channel of the HUB to connect up to 255 devices, IF you observe the RS485 network
connection and termination requirements. The last device in the daisy chain on each channel requires 120 Ohm line termination.