Zipato PHPAN08US Z-Wave Micro Module Motor Controller

- Controls one load locally or by Z-Wave remote

- Reports status via two-way communication

ZPRGBWE27ZWUS Installation Manual  

Add Z-Wave remote control to the wall switch that controls your motorized blinds, shades, or other up/down motor with the Zipato Z-Wave Micro Module Motor Controller. This small, hidden Z-Wave module installs in the electrical box behind your switch, and wires in between your switch and the connected load. Once the module is set up, you control the load with the traditional wall switch, a Z-Wave remote, or the module's built-in pushbutton.

If your load has no existing wall switch, the MicroModule can be installed alone in an electrical box and serve as the local switch for your connected load. A built-in pushbutton on the front of the module will provide local in-wall On/Off control.

How It Works

When the module is installed behind an existing wall switch, the switch no longer directly controls the connected load. Instead, the switch serves as an input device for the module, which has an internal relay to control the load. The relay transmits commands to your load from the wall switch or a Z-Wave remote.