Your shopping cart is currently empty. Please continue shopping - as there is nothing to check out
GRI - CS-1 Current Sensor
Price: $10.38
|
- Fails Safe With Excessive Current - Micro-Weld Switch Protection - Channels Voltage Above 60 V To Ground - Available In Recessed & Surface Styles - Plus Heat Shrink For In-Line Installations CS-1 Current Sensor Product SpecificationSold in packs of ten, please call for single pricing.
|
Two things cause switch failure:
1) Excessive Current: Switch protected from excessive current by Quick Blow fuse. Maximum reed switch rating is .5 amp. = 500 mA switching. If current exceeds .5 amp. fuse will blow. In Fail Safe condition, switch must be replaced.
2) High Voltage: SIDActor threshold 60 AC/DC volts. If voltage exceeds 60 volts, SIDActor will clamp down, channeling any voltage above 60 directly to ground but will not cause switch device to fail or mis-operate and will continue to work.
The new sensors can be purchased with the protection built directly into your reed switch or you may prefer the G.R.I. CS-1 heat shrink version, which you connect in-line with your switches.
Please see diagrams on reverse for installation information on switch protection plus minimum and maximum zone protection. When using the CS-1, it should be installed directly in front of the contact(s).
