Intermatic HomeSettings HA05C Z-Wave Indoor/Outdoor Screw-in Module

- For incandescent and PAR lamps

- ON/OFF functions

- You CANNOT DIM with this module

- 300 watts, 2.5 amps Tungsten; 42 watts compact fluorescent

- Screw-in lamp module allows you to add Z-Wave RF remote control to any indoor or outdoor light fixture with minimal effort

HomeSettings HA05C Manual

The HA05 Screw-in Lamp Module is a Z-wave™ enabled device and is fully compatible with any Home Settings network and any Z-wave™ enabled network. Z-wave™ enabled devices displaying the Z-wave™ logo can also be used with Home Settings modules and controllers regardless of the manufacturer, and Home Settings modules and controllers can also be used in other manufacturer’s Z-wave™ enabled networks. Each module in a Home Settings network is designed to act as a repeater. Repeaters will re-transmit the RF signal to ensure that the signal is received by its intended destination by routing the signal around obstacles and radio dead spots.

The outstanding features of the HomeSettings HA05 Screw-in Lamp Module includes:
• Feedback that will allow you to see whether your device has received the ON/OFF (you cannot DIM with this module) signal.
• RF signal reliability – each HomeSettings product has a special feature that virtually guarantees that RF signals are received
• Ease of installation
• Manual override
• Weather resistant housing
• Controls compact fluorescent lights up to 42 Watts
• Compatible with other Z-wave™ enabled devices

Screw in socket lamp module is perfect for light fixtures that cannot be controlled by a wall switch or plug-in lamp module. For incandescent and compact fluorescent bulbs. Does not support dimming. Requires a Z-Wave remote controller, HomeSeer Pro 100 or the HomeSeer HS2 Home Control Software (when used with a compatible Z-Wave PC interface).