System Sensor 2W-B 2 Wire Photoelectric Smoke Detector

- Detection: Photoelectric

- Wiring: 2-wire

- Operating Voltage: 12/24 V non-polarized nominal, 8.5 min. to 35 max

- Maximum Ripple Voltage: 30% of nominal (peak to peak)

- Alarm Current: 130mA max., limited by panel

- Standby Current: 50 A max. avg., 100 A peak

- Temperature Range: 32 to 120F (0 to 49C)

- Humidity Range: 0% to 95% RH, noncondensing

- Sensitivity: 2.5%/ft. nominal

- Wiring Gauge: 14-22 AWG

- Dimensions: 2.0" (51mm) H x 5.3" (127mm) Dia.

- Weight: 6.3 oz. (178 g)

System Sensor 2W-B Manual

System Sensor 2W-B Data Sheet

Models 2W-B and 2WT-B are 2-wire photoelectric smoke detectors; models 4W-B and 4WT-B are 4-wire photoelectric smoke detectors. All models incorporate a state-of-the-art optical sensing chamber and an advanced microprocessor. The microprocessor allows the detector to automatically adjust its sensitivity back to the factory setting when it becomes more sensitive due to contaminants settling in its chamber. In order for this feature to work properly, the chamber must never be opened while power is applied to the smoke detector. This includes cleaning, maintenance or screen replacement. Should it become necessary, the screen/sensing chamber is field replaceable. Models 2WT-B and 4WT-B also feature a restorable, built-in, fixed temperature (135°F) thermal detector and are also capable of sensing a freeze condition if the temperature is below 41°F.